T H E   W O R L D ' S   L A R G E S T   S E L E C T I O N   O F   A V I A T I O N   T R A I N I N G   M A T E R I A L S

For the 2, 3, and 4 page sets, the entire cockpit is printed on sheets that measure 17 inches (43.2 cm) x 36 inches (91.4 cm).

For the 2-page set:

  • The overhead panel and the center pedestal are printed on one sheet.
  • The flight instruments panel is printed on a single sheet.

 

Note: each panel is maximized to the printable area and subsequently the panels are printed at different scales i.e. the panels are not in proportion to each other

 

For the 3-page set:

  • The overhead panel is printed on one sheet.
  • The flight instruments panel is printed on a separate sheet.
  • The center pedestal is printed on a separate sheet.

 

Note: each panel is maximized to the printable area and subsequently the panels are printed at different scales i.e. the panels are not in proportion to each other

 

For the 4-page set:

  • Same layout as the 3-page set
  • The 4th sheet contains either the circuit breaker panels,
  • or the side panels, depending on the aircraft.

 

Note: each panel is maximized to the printable area and subsequently the panels are printed at different scales i.e. the panels are not in proportion to each other

 

For the T-bone set:

  • The entire flight deck is printed on one sheet.
  • Circuit breaker panels are not included.
  • Depending on the aircraft, the side panels may be printed as well.

 

Note: panels are proportional to each other

 

 

We customize our cockpit posters for Airline Training Centers and Aviation Training Organizations. Depending on the purchase quantity, we can often customize our posters for no extra charge. Contact our Marketing Department for details by sending an email to marketing@avsoft.net